Welcome to Your ORCA Cold Plunge Experience
How to Set Up an Inflatable Cold Plunge (Step-by-Step) Tutorial.
How to Install Your Fittings & Tubing (Standard Hose Kit)
How to Install Your Fittings & Tubing (Quick Release Hose Kit)
How to Set Up Your ORCA 3/4 HP Water Chiller
How to Set Up Your ORCA 1HP Water Chiller
Wheel Bracket Installation
How to Properly Prime Your Water Chiller
How to Change Your Filter (Outdoor)
How to Change Your Filter (Indoor)
Weekly Sanitation Protocol
1. Activate the Ozone once a day.
3. Check the ph to ensure it is between 7.2-7.8. If so, you're done, and the tub is now sanitized. If your ph reading is outside of the above range, you will add a small amount of ph up or ph down to adjust the ph into the correct range.
We suggest using a digital ph meter as test strips are hard to read. You will also want to change out your sediment filter regularly (every 2 weeks) to be sure that debris such as skin cells, hair, etc are removed from the plunge to prevent water flow issues.
Bluelab pH Pen Meter and Probe Care Kit
🔒 How to Use the Combination Lock on Your Inflatable Tub
Your tub includes a factory-set combination lock to help secure the lid when not in use. Please note:
The code is permanently set to “00” and cannot be changed.
Here’s how to use it:
To lock the lid, set dials to "00". Buckle straps to the tub. Turn the dials to any combination other than "00" to lock it.
To unlock and remove the lid, turn the dials back to "00". Squeeze the sides of the buckle to unfasten.
This simple locking system helps keep your tub secure while still being quick and easy to access.
ORCA Water Chiller - WiFi & O-Zone Instructions - PDF DOWNLOAD